CUSTOM BUILT REVERSE OSMOSIS SYSTEMS-
This unit uses a large 20" x 4.5" filter unit and two membranes
Since the introduction of FLUORIDE, Many people have turned to REVERSE OSMOSIS for its fantastic removal of not only FLUORIDE, but all of the contaminants in our water.
Alum Sulphate is another one of the most harmful contaminants in our water supply. It is used for flocking the dams, which means dragging all the sediment to the bottom of the dams...
Problem is is surfaces in all the test results and is linked to many human health issues...
We are having literally thousands of calls every month with many people looking for AFFORDABLE ways to filter all the water coming into the house as to avoid the TOXIC poisons in our water like FLUORIDE entering our body through our pores...
This is the Answer... These units are also fantastic for bore water at removing all bore water related contaminants, and a way around the high costs of the commercial units that start at $8000.00 and do 4000 LPD (maybe over kill for some).
***VERY IMPORTANT!!! EACH MEMBRANE DOES 400 LPD WHICH EQUATES TO 16 LITRES PER HOUR
SO THE 2 MEMBRANE UNIT DOES 32LPH, THE 3 DOES 48LPH AND THE 5 DOES 80 LPH...
THE REASON IM EXPLAINING THIS IS SO YOU UNDERSTAND THESE ARE NOT INSTANT/PRESSURISED UNITS WHICH MEANS YOU WILL NEED TO RUN THE WATER INTO A HOLDING TANK (LIKE A RAIN WATER TANK) AND PUMP IT TO YOUR APPLICATION FROM THERE...
THERE IS ALSO A LARGE WASTE PORTION, BETWEEN 1-1 AND 5-1 DEPENDING ON YOUR WATER PRESSURE (MORE PRESSURE= LESS WASTE). YOU WILL NEED TO BE ABLE TO DUMP THIS WASTE BY FEEDING IT BACK TO EARTH OR DRAIN...
Chromium III 98%
Mercury II 85%
Total Dissolved Solids 95%
Tannic Acid 98%+